Giselle Smart Robot Dry & Wet Water Tank Vacuum Cleaner GI Floor Sweeping KEA0365
🔴Dry & Wet with Water Tank
🔴 Anti Fall Sensor
🔴 Hybrid 2 IN 1 VACUUM & MOP
🔴 Auto Recharge & Long Lasting Battery
🔴 Quickly capture coordinate information
🔴 Maintain dynamic surveys while traveling
🔴 Mapping more accurately and efficiently
🔴 Cleans deep into the gap efficiently
🔴 Powerful Main Brush wit strong suction
🔴 Large diameter suspension suction port
🔴 Suspended suction mouth
🔴 Suction Power : 1.4kPa
🔴 with 250ml water tank
🔴 High precision sensor
🔴 74 mm slim body
Category Item Specification
1️⃣ Diameter : 300 mm
2️⃣ Structure Height 74 mm
3️⃣ Net weight 2.5 kg
1️⃣ Dust box capacity : 200 ml
2️⃣ Charging type : Auto charging and manual charging
3️⃣ Cleaning mode : Auto cleaning; Spot cleaning; Edge cleaning
4️⃣ Charging time : About 300 minutes
5️⃣ Cleaning time : About 100 minutes
1️⃣ Rated power (W) : 28
2️⃣ Operating voltage (V) : 14.4
USING THE PRODUCT – STARTING CLEANING
For different cleaning requirements, this product provides multiple cleaning modes for you to choose. You can use different cleaning modes through the main unit or remote control.
⭕️ Automatic Cleaning
Setting method: In the power-off state, press and hold the power button. After the indicator of the main unit is on, indicating that the main unit is powered on, press the power button again.
⭕️ Fixed-point Cleaning
Applicable scenario: The cleaning mode is applicable to the ground environment where rubbish is concentrated. The main unit cleans the ground in a spiral path in the specified area and returns to the original point after cleaning.
⭕️ Cleaning along the Edge
Applicable scenario: The cleaning mode is applicable to indoor corners. The main unit cleans the ground along edges of fixed objects (for example, wall) and returns to the charging standard after cleaning.
⭕️ Manual Control
Applicable scenario: Manual control is applicable to cleaning under manual control.
USING THE PRODUCT – PAUSE, WAKE-UP AND SHUTDOWN
⭕️ Pause: When the main unit is working, press the power button on the main unit or press the pause key on the remote control to suspend the main unit.
⭕️ Wake-up: After the main unit is suspended for more than 10 minutes, the main unit activates the sleep mode (the indicator of the main unit is off). Press the power button on the main unit to wake up the main unit and press the power key on the remote control to restart the main unit.
⭕️ Shutdown: After the main unit is suspended, press and hold the power button on the main unit. If indicator of the main unit is off, the product is powered off.
⭕️ * After the main unit completes operation, you are advised not to shut down the main unit. Keep the main unit in the charging status so that it can work better in the next operation.
I lov this robot